The first is glue application:you can use a special glue applicator to paint the surface, but you must ensure the uniformity of thickness, and you must not apply the glue repeatedly, otherwise foaming will occur, and if it is serious, it will directly cause artificial The lawn fell. When applying glue to the base cloth, a special glue applicator must be used to strictly control the thickness of the glue and pay attention to the speed of glue application. artificial turf
Next is the adhesion:mainly based on the analysis of the temperature, air pressure and humidity at the time, and reasonable control of the drying time. Under normal circumstances, dry the artificial turf for about 10-30 minutes after the glue is applied, and it is not allowed to move the artificial turf after the adhesion has been completed. artificial turf
Pressing again: After bonding the artificial turf, clean the surface of the debris, and then use a special rubber hammer to hammer from both sides of the bonding position, mainly to ensure that the surface of the artificial turf is in contact The upper is more encrypted, and the bonding is stronger. artificial turf
Then there is curing: the normal curing time is three days, and the final strength test is about ten days. Therefore, during the entire curing time of the artificial turf, it needs to be closely maintained and maintained to avoid sun exposure and The artificial turf that has been soaked in rainwater and adhered well, before being sprinkled with quartz sand and rubber particles, it is good that the imported cleaner can be used to properly trim the turf.
