1,Check and accept the basic engineering: remove the debris in the foundation, if there is any unevenness, it should be repaired and leveled in time. The construction site should be kept clean to ensure the construction quality.

2,Unfold the lawn with the back side up, prepare scissors or utility knife, line drawing tools, steel tape and other tools

3, Draw a line on the back of the turf according to the required size. After the line is drawn, use scissors or a utility knife to cut along the line drawing area

4, After cutting the turf according to the size, put it in the place to be constructed, and then apply the glue

5, Preparations before gluing: A. Clean the bottom surface of the turf that needs to be bonded and the surface is dry and free of moisture. B. The ambient temperature should be selected above 5 ℃ for construction. It is not suitable for construction in rainy and snowy weather, otherwise it will lead to bonding time. Too long, and even cause no sticking to the home.

6, Glue: The brush should be evenly thick and thin on the back of the turf, and the glue should not be applied repeatedly, otherwise there will be blistering or even falling off, and the bottom of the turf should be glued.

Adhesion: within 10-30 minutes of gluing, use glue to reach
When it is 80 to 90% dry, it is advisable to touch it without sticking. When bonding, it is required to align and stick firmly at one time. Do not move the bonded lawn back after bonding.

Glue the seams.

Great work!!!